Electrical Contractor Licence in Rajasthan – Class A, B, C & D

Complete consultancy for a new Rajasthan electrical contractor licence in Class A, B, C or D, from eligibility and staffing to documents, application and inspection of tools.

An SKE engineer in a helmet testing a live panel with a clamp meter
Since 2008All Rajasthan
JVVNL, AVVNL and JdVVNL areas

How Electrical Contractor Licence (A/B/C/D) works

Electrical installation work in Rajasthan must be carried out by a licensed electrical contractor. Licences are granted under the Rajasthan Electrical Inspectorate (Formation of Technical Committee and Grant of Licence, Competency Certificate to work and Permit to work) Rules, 2016, which set out four classes of contractor licence (A, B, C and D) with different eligibility, staff and scope of work.

Choosing the wrong class, missing a staff requirement or submitting an incomplete file are the most common reasons applications are delayed or returned. We assess your eligibility, recommend the right class for the work you want to take up, arrange the documents and guide you through the inspection of tools and appliances.

The SKE team in helmets and high-visibility vests at a solar site

Rajasthan electrical contractor licence: the complete guide

4
licence classes: A, B, C and D Rule 3, Schedule-I
7–10
days to issue after a complete application; the Committee meets at least once in 3 months Rules 17, 20
5 or 10
years initial validity: firms 5, individuals 10 Rule 7
1
office in Rajasthan, required for every class Rule 3(2)(a)

Class A, B, C and D compared

Contractor licence class finder
  • Statutory Required by the Act, Rules or Regulations named.
  • Office practice What the Inspectorate’s current form or office asks for. It can change without a new notification.
  • SKE advice Our recommendation from the files we handle. Not a legal requirement.
  • To confirm Not yet verified against the official Gazette or the competent authority. Confirm before relying on it.

Swipe the table sideways to see every column.

Class AClass BClass CClass D
Work allowed
Schedule-I
All voltage classesUp to 33 kVSame as Class B (up to 33 kV)House and agricultural wiring up to 650 V
Who can apply
Schedule-I
3 years as a B or C class contractor with at least 10 HT installations; or other routes in Schedule-I (engineer owners with 5 years of O&M experience, or a contractor licensed in another state)Any individual, firm or company, or a contractor licensed in another stateUnemployed electrical engineering graduates or diploma holders, or Class A supervisors; Rajasthan domicile onlyHolders of a supervisor or wireman certificate or permit issued by the Inspectorate
Supervisors on regular payroll
Schedule-I
At least 2 (both A, or one A and one B)At least 1 (A or B)At least 1 (A or B)None
Wiremen on regular payroll
Schedule-I
At least 4At least 2At least 1None
Tools and test instruments
Schedule-I
Wiring and jointing tools plus meggers (500 V, 1 kV, 5 kV), earth tester, tong tester, phase sequence meter, multimeter, voltmeter and PF meterSame as Class ASame as Class AAt least a multimeter, a megger and wiring tools
Solvency
Schedule-I; Form-B
₹10,00,000₹7,50,000₹1,00,000 in the Inspectorate’s Form-B. The consolidated Rules print the figure as 1,00,000 but the words as “Seven Lakh Fifty thousand”. Confirm with the office.₹10,000
Time to issue
Rule 20
10 days7 days7 days7 days
From a complete application. Deficiencies must be told to you within 3 days (Rule 20(2)).

Licences are granted by the Technical Committee after an Electrical Inspector inspects your tools and appliances.

What the rules require, and what we advise

Rule 9

How to apply

In person, by registered post, or online at the website the State Government specifies, with the documents and fee (Rule 9(2)). The Inspectorate’s Form-B is the application form.

Rule 7(1)

Validity

Private and public limited companies and partnership firms: 5 years. Individuals and proprietorships: 10 years, with physical verification once a year. A valid solvency certificate is needed throughout.

Rule 13

Renewal

Apply at least one month before expiry with proof of the fee. Firms renew for 5 years if the legal entity has not changed; individuals renew for 5 years after the initial period.

Rule 7(5), 7(6)

Class C time limit

A Class C holder must apply for a licence of another class after 5 years from the original Class C licence. If the supervisor or wireman leaves, Class C is treated as Class D unless you inform the office within 7 days and employ replacements within 15 days.

Rules 7, 22(2)

Changes you must report

New address or phone number within 7 days; a change of directors or partners within 30 days. A partnership licence lapses if the legal entity changes.

To confirm · Rules 14(1), 23(1)

Work returns (Form-D)

Contractors file returns of electrical works in Form-D. Missing two consecutive quarters is a ground for suspension or cancellation. A notification of 13 January 2025 reminded all contractor classes to file Form-D; we are confirming its current periodicity and filing mode.

Rule 22(1), 22(3)

Completion certificates (Form-F)

Your supervisor signs Form-F and you, as licensee, countersign it before the completion certificate is issued. You are responsible for your employees’ work.

Schedule-I, Note 1

Out-of-state contractors

A contractor licensed elsewhere can get a temporary work permit for one work order, for the equivalent class only, on payment of the notified fee.

Why files get sent back SKE advice

  • Supervisors or wiremen who are still on another contractor’s payroll. Willingness and appointment letters are checked.
  • A calibration certificate that has expired or is not from an accredited laboratory.
  • A solvency certificate below the class amount, valid for less than five years, or in a name that differs from the application.
  • Class A applications without proof of at least 10 HT installations.
  • A partner or director change not reported within 30 days.
Free tool Which electrical contractor licence class do I need? Tell us the work you do and your team. You get the licence class that fits and what it takes to apply. Open the tool

What you pay, and to whom

Rule 2(n)

Government fees

Application, licence and renewal fees are set by the State Government and revised from time to time (Rule 2(n)). They are paid to the Inspectorate at actuals under the notification in force on the day you apply. We do not quote government fees from memory or from other websites; we confirm the current figure with the office before you pay.

Office practice · Rule 3(2)(e); Form-B

Solvency (not a fee)

A solvency certificate for the class amount, in the applicant’s name. It is a financial requirement, not a payment to anyone. The Rules allow a Tehsildar or nationalised bank certificate; the Inspectorate’s current Form-B asks for a nationalised bank in Rajasthan, valid for at least five years.

SKE advice

SKE professional fee

Our consultancy charge for eligibility check, file preparation, tools checklist, inspection support and follow-up. Quoted in writing before we start, separate from every government payment.

SKE advice

Other expenses

Costs you may pay to others: calibration of the megger and earth tester by an accredited laboratory, attestation of photographs, medical fitness certificates, the cost of the application form, and travel for the tools inspection outside Jaipur.

Government fees are payable separately at actuals, under the notification in force when you apply. Our professional fee never includes them.

Sources and how current this is

Checked by our engineers in November 2026 against published texts of the rules. Rules, forms, fees and thresholds change; items marked “To confirm” are being verified with the competent authority. This page is general guidance, not legal advice. Shree Kalyan Enterprises is an independent consultancy and is not part of, or affiliated with, any government department, the Electrical Inspectorate or any DISCOM.

What our Electrical Contractor Licence (A/B/C/D) service covers

01

Eligibility & class selection

Experience, entity type and work scope matched to the right licence class.

02

Staff requirement

Supervisor and wireman competency certificates and permits checked.

03

Tools & appliances

List of required testing instruments and tools for the inspection.

04

Documentation

Application form, solvency, experience and staff documents prepared.

05

Online application

Submission to the office of the Chief / Senior Electrical Inspector.

06

Inspection support

Preparation for inspection of tools by the Electrical Inspector.

Documents for Electrical Contractor Licence (A/B/C/D)

  • Specimen signature and three recent colour photographs, attested by a Gazetted Officer
  • Fee payment (demand draft or online payment, as the office asks at the time)
  • Solvency certificate for the class limit, in the applicant's name
  • Willingness letters from your supervisors and wiremen, with copies of their permits and competency certificates
  • Appointment letters for the supervisors and wiremen
  • Calibration certificates from an accredited laboratory, with proof of the Schedule-I tools and instruments
  • PAN card and photo ID of the applicant
  • Office address proof in Rajasthan: utility bill or bank passbook
  • Partnership deed, or MoA and AoA with an authorisation letter (firms and companies)
  • Educational qualification certificates
  • Experience proof (Class A), or a copy of your Class B licence if upgrading
  • Self-declaration of unemployment (Class C)
  • Medical fitness certificate

Open your document checklist in the customer portal

Reports and approval letters

  • Eligibility and class recommendation
  • Complete, checked application file
  • Tools and instruments checklist
  • Inspection preparation
  • Follow-up until licence issue
  • Renewal and compliance reminders

Regulations behind Electrical Contractor Licence (A/B/C/D)

  • Rajasthan Electrical Inspectorate (Formation of Technical Committee and Grant of Licence, Competency Certificate to work and Permit to work) Rules, 2016, as amended
  • CEA (Measures relating to Safety and Electric Supply) Regulations, 2023
  • Electricity Act, 2003

Electrical Contractor Licence (A/B/C/D) in 7 steps

Eligibility, staff requirements and fees are set by the Rules and current notifications of the Electrical Inspectorate, Rajasthan. We verify the latest requirements at the time of your application.

An SKE engineer shaking hands with a client in a meeting room
  1. 1

    Consultation

    Work scope & class

  2. 2

    Eligibility

    Experience & staff

  3. 3

    Documents

    File prepared

  4. 4

    Application

    Submitted to HoD

  5. 5

    Tools check

    Inspector inspection

  6. 6

    Technical Committee

    Review

  7. 7

    Licence

    Issued

Questions about Electrical Contractor Licence (A/B/C/D)

Answered by our engineers. Ask us if yours is not here.

Ask an engineer

How many classes of electrical contractor licence are there in Rajasthan?

Four: Class A, B, C and D, as set out in Schedule-I of the Rajasthan licensing rules of 2016. Each has different eligibility, staff requirements and scope of work.

Which class do I need for solar installation work?

It depends on the voltage and size of the installations you plan to execute. We match the class to your project pipeline so you do not under- or over-apply.

How long does it take to get the licence?

The rules set time limits for issue after a complete application is received (for example, ten days for Class A and seven days for B, C and D). Overall time depends mainly on how quickly a complete file and the tools inspection are done.

What is the validity of the licence?

Five years for companies and partnership firms, and ten years for individuals and proprietorships, with a valid solvency certificate throughout (Rule 7). Renewal is applied for at least one month before expiry (Rule 13). We remind you before it falls due.

Do I need a supervisor and wireman on staff?

For Classes A, B and C, yes: Schedule-I sets a minimum number of supervisors and wiremen on regular payroll (for example 2 supervisors and 4 wiremen for Class A). Class D needs no staff, because the applicant already holds a supervisor or wireman certificate or permit.

Can you help upgrade from Class B to Class A?

Yes. We assess your experience and staff against the Class A conditions and prepare the upgrade application.

What does a Class A licence allow?

Highest class, covering all voltage classes. Typically requires prior experience as a B or C class contractor and more supervisors and wiremen on staff.

What does a Class B licence allow?

Installation work up to 33 kV. Any individual, firm or company can apply, with at least one A or B class supervisor and two wiremen on regular payroll.

What does a Class C licence allow?

Work up to 33 kV, for unemployed electrical engineering graduates or diploma holders, or Class A supervisors, with Rajasthan domicile. A Class C holder must apply for another class after five years (Rule 7(5)).

What does a Class D licence allow?

House and agricultural wiring up to 650 V. It is for holders of a supervisor or wireman certificate or permit issued by the Inspectorate, and needs a multimeter, a megger and wiring tools.

Electrical Contractor Licence (A/B/C/D) across all 41 districts of Rajasthan

We handle this work with all three DISCOMs, from our Jaipur office. Find your area:

Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra

WhatsApp