Transformer Inspection, Approval & Compliance in Rajasthan (63 kVA to 10,000 kVA)

Approval, testing and compliance for consumer-owned distribution and power transformers from 63 kVA to 10,000 kVA, including substations, earthing and protection.

An SKE engineer explaining an electrical drawing to a client beside switchgear panels
Since 2008All Rajasthan
JVVNL, AVVNL and JdVVNL areas

How Transformer Inspection & Approval works

A consumer-owned transformer is the heart of every HT installation. Before it is energised, the transformer, its HT and LT switchgear, protection, earthing and substation layout must meet the CEA safety regulations, and the installation must be approved by the Electrical Inspectorate in Rajasthan.

Shree Kalyan Enterprises handles transformer approvals from 63 kVA to 10,000 kVA for new connections, load extensions, transformer replacements and capacity augmentation. We check the substation design, review test certificates, arrange site tests and coordinate the inspection, so that the DISCOM can release or enhance the connection without delay.

An engineer testing an HT panel with a meter inside an electrical room

What our Transformer Inspection & Approval service covers

01

Substation design review

SLD, clearances, fencing, plinth, cable trench and layout checked.

02

Earthing system

Neutral, body and equipment earthing with test results.

03

Protection

HT breaker / VCB, relays, LA, DO fuses and LT protection reviewed.

04

Transformer testing

IR, ratio, winding resistance and oil BDV as applicable.

05

Approval file

Application, manufacturer test certificates and contractor documents.

06

Inspection & energisation

Coordination with the Electrical Inspectorate and DISCOM for energisation.

Documents for Transformer Inspection & Approval

  • Transformer routine test certificate from the manufacturer
  • Single line diagram and substation layout
  • Earth resistance test report
  • Insulation resistance and oil BDV test reports
  • HT breaker / relay test reports
  • Electrical contractor licence and completion report
  • DISCOM technical feasibility or sanction letter
  • Inspection fee challan

Open your document checklist in the customer portal

Reports and approval letters

  • Design and documentation review
  • Transformer and earthing test results
  • Pre-inspection compliance report
  • Approval application and follow-up
  • Observation compliance support
  • Energisation coordination with the DISCOM

Regulations behind Transformer Inspection & Approval

  • CEA (Measures relating to Safety and Electric Supply) Regulations, 2023, as amended
  • RERC Supply Code and DISCOM technical requirements for HT connections
  • Relevant Indian Standards for transformers, earthing and switchgear

Transformer Inspection & Approval in 7 steps

Transformer approvals are often linked to a new connection or load extension with the DISCOM. We coordinate both tracks so that the Electrical Inspector approval and the DISCOM release happen together.

The SKE team in helmets and high-visibility vests at a solar site
  1. 1

    Requirement

    kVA, voltage, location

  2. 2

    Design check

    SLD & layout

  3. 3

    Testing

    Transformer & earthing

  4. 4

    Pre-check

    Gap list closed

  5. 5

    Application

    Inspectorate file

  6. 6

    Inspection

    Site inspection

  7. 7

    Energisation

    Approval & charging

Questions about Transformer Inspection & Approval

Answered by our engineers. Ask us if yours is not here.

Ask an engineer

Does a new consumer transformer need Electrical Inspector approval?

Yes. A consumer-owned HT transformer installation must be inspected and approved before energisation under the CEA safety regulations.

Do you handle transformer replacement or upgrade?

Yes. Replacing or upgrading a transformer changes the installation and generally needs fresh approval, which we handle along with any DISCOM load change.

What tests are needed before approval?

Typically insulation resistance, earth resistance, oil BDV, ratio and winding resistance, plus breaker and relay tests. The exact list depends on the transformer and inspector requirements.

Can you inspect an old substation?

Yes. We carry out condition assessments with thermography, oil testing and earthing tests, and give a prioritised list of repairs.

Which transformer sizes do you handle?

We regularly handle 63 kVA to 10,000 kVA transformers at 11 kV and 33 kV. Larger installations can be scoped on request.

Transformer Inspection & Approval across all 41 districts of Rajasthan

We handle this work with all three DISCOMs, from our Jaipur office. Find your area:

Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra

WhatsApp