HT Panel Design and Installation in Jaipur & Rajasthan
HT panel design, specification, vendor review, installation supervision, testing and Electrical Inspector approval for 11 kV and 33 kV supplies.
How HT Panel Design & Installation works
The HT panel is the first protection between the DISCOM supply and your plant. A wrongly rated breaker, poor relay settings or a layout without the right clearances can cause long outages, damage the transformer and hold up the Electrical Inspector’s approval.
We design HT installations for 11 kV and 33 kV consumers: the single line diagram, breaker and CT/PT ratings, protection relays and settings, metering arrangement as required by the DISCOM, cable sizing and the room or kiosk layout. We review vendor drawings, inspect the panel at the factory if needed, supervise installation and carry out the tests.

What our HT Panel Design & Installation service covers
Single line diagram
Scheme of incomer, outgoings, metering and protection.
Ratings and protection
VCB, CT/PT ratings, relays and setting calculation.
Layout and cables
Room or kiosk layout, clearances and HT cable sizing.
Specification and vendor review
Technical specification and drawing approval.
Installation supervision
Erection, cable termination and earthing.
Testing and approval
Pre-commissioning tests and CEIG approval file.
Documents for HT Panel Design & Installation
- Sanctioned or proposed load and contract demand
- DISCOM feasibility or demand note
- Site plan showing the substation location
- Existing single line diagram (for extensions)
- Vendor offers or drawings, if already received
Reports and approval letters
- Single line diagram and protection scheme
- Relay setting calculation
- HT panel technical specification
- Approved vendor drawings
- Pre-commissioning test reports
- CEIG approval file
Regulations behind HT Panel Design & Installation
- CEA (Measures relating to Safety and Electric Supply) Regulations, 2023
- IS/IEC 62271 series for HT switchgear
- DISCOM metering and connection requirements for HT consumers
HT Panel Design & Installation in 7 steps
Panel supply and erection are by your chosen vendor and licensed contractor; we design, supervise, test and take the installation through approval.

- 1
Load study
Demand and supply voltage
- 2
Design
SLD, ratings and layout
- 3
Specification
Tender and vendor review
- 4
Inspection
Factory and site checks
- 5
Installation
Supervised erection
- 6
Testing
Relays, IR and cables
- 7
Approval
CEIG and DISCOM release
Questions about HT Panel Design & Installation
Answered by our engineers. Ask us if yours is not here.
Ask an engineerDo you manufacture HT panels?
No. We design and specify the panel, review the vendor’s drawings, inspect it and supervise installation, so you get an independent check on the vendor.
Which voltages do you work with?
Mainly 11 kV and 33 kV consumer installations in Rajasthan.
Do you calculate relay settings?
Yes. We calculate and test the protection settings and coordinate them with the DISCOM’s upstream protection.
Will the design pass CEIG inspection?
We design to the CEA regulations and handle the CEIG file ourselves, which avoids most inspection observations.
Can you upgrade an old HT panel?
Yes. We assess the existing panel and design a retrofit or replacement, including for load extension.
HT Panel Design & Installation across all 41 districts of Rajasthan
We handle this work with all three DISCOMs, from our Jaipur office. Find your area:
- Jaipur zone (JVVNL)Eastern Rajasthan
- Ajmer zone (AVVNL)Central and southern Rajasthan
- Jodhpur zone (JdVVNL)Western Rajasthan
Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra


