Electrical Drawing and Design Consultant in Jaipur & Rajasthan
Single line diagrams, layouts, earthing and lightning protection drawings, prepared and signed for construction, CEIG approval and DISCOM files.
How Electrical Drawing & Design works
Every approval file starts with drawings. The Electrical Inspector and the DISCOM check the single line diagram and layouts against the site, and a drawing that is incomplete or does not match the installation is one of the most common reasons for delay.
We prepare electrical drawings for new projects and for existing installations that were never documented: single line diagrams, panel schedules, cable routes, equipment layouts, earthing and lightning protection, and lighting and power layouts for buildings.

What our Electrical Drawing & Design service covers
Single line diagrams
HT and LT schemes with ratings and protection.
Equipment layouts
Substation, panel room and DG layouts with clearances.
Cable routes and schedules
Cable sizes, routes and trench details.
Earthing and lightning
Earthing grid and lightning protection design.
Building services
Lighting and power layouts for buildings.
Approval drawings
Drawings formatted for CEIG and DISCOM files.
Documents for Electrical Drawing & Design
- Site plan or architectural drawings
- Equipment list with ratings
- Existing drawings, if any
- DISCOM feasibility letter (for approval drawings)
Reports and approval letters
- Single line diagram
- Equipment and cable layouts
- Earthing and lightning protection drawings
- Cable schedule and panel schedules
- Drawings in PDF and CAD format
Regulations behind Electrical Drawing & Design
- CEA (Measures relating to Safety and Electric Supply) Regulations, 2023
- IS 3043 (earthing) and IS/IEC 62305 (lightning protection)
- National Building Code of India, Part 8: Building Services
Electrical Drawing & Design in 6 steps
Approval drawings must match the installation on site; we check the site before issuing them.

- 1
Brief
Project and purpose of drawings
- 2
Survey
Site measurement if existing
- 3
Design
Calculations and scheme
- 4
Drafting
CAD drawings
- 5
Review
Your comments
- 6
Issue
Final signed drawings
Questions about Electrical Drawing & Design
Answered by our engineers. Ask us if yours is not here.
Ask an engineerWhich drawings does the Electrical Inspector need?
Usually the single line diagram and the layout of the equipment being approved, with earthing details. Some installations need more, which we confirm for your case.
Can you make drawings for an old installation?
Yes. We survey the site and prepare as-built drawings, which you need for approvals, audits and maintenance.
Do you give CAD files?
Yes, drawings are issued in PDF and in CAD format.
Do you design earthing and lightning protection?
Yes, with calculations to the Indian Standards and layouts for the contractor.
Electrical Drawing & Design across all 41 districts of Rajasthan
We handle this work with all three DISCOMs, from our Jaipur office. Find your area:
- Jaipur zone (JVVNL)Eastern Rajasthan
- Ajmer zone (AVVNL)Central and southern Rajasthan
- Jodhpur zone (JdVVNL)Western Rajasthan
Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra


