Electrical Testing and Inspection in Jaipur & Rajasthan

Pre-commissioning and periodic testing of transformers, panels, cables, relays and earthing, with formal reports for approvals, insurance and maintenance.

An engineer testing an HT panel with a meter inside an electrical room
Since 2008All Rajasthan
JVVNL, AVVNL and JdVVNL areas

How Electrical Testing & Inspection works

Before a new installation is energised, and at regular intervals after that, its equipment has to be tested to show it is safe and will work as designed. The Electrical Inspector expects these test reports in the approval file, and insurers and auditors ask for them too.

We test transformers (IR, ratio, winding resistance and oil BDV), HT and LT panels, relays and breakers, HT and LT cables, and earthing systems, and inspect the installation against the drawings and the regulations.

An engineer with a tablet checking a transformer installation outdoors

What our Electrical Testing & Inspection service covers

01

Transformer tests

IR, ratio, winding resistance, oil BDV.

02

Panel and breaker tests

IR, contact resistance and operation checks.

03

Relay testing

Protection relays tested against settings.

04

Cable tests

IR and HV tests of HT and LT cables.

05

Earthing tests

Earth pit and grid resistance.

06

Inspection

Installation checked against drawings and rules.

Documents for Electrical Testing & Inspection

  • Single line diagram and layout
  • Equipment manufacturer test certificates
  • Relay setting chart
  • Earlier test reports (for periodic testing)

Open your document checklist in the customer portal

Reports and approval letters

  • Test reports for each piece of equipment
  • Inspection checklist and observations
  • Instrument and calibration details
  • Recommendations for corrections

Regulations behind Electrical Testing & Inspection

  • CEA (Measures relating to Safety and Electric Supply) Regulations, 2023
  • Relevant Indian Standards for transformers, switchgear, cables and earthing
  • Electrical Inspector requirements for approval test reports

Electrical Testing & Inspection in 6 steps

Some tests need the equipment to be de-energised; we plan the shutdown with you.

SKE engineers at work in the Jaipur office with drawings and screens
  1. 1

    Scope

    Equipment and tests

  2. 2

    Planning

    Shutdown and permits

  3. 3

    Testing

    Calibrated instruments

  4. 4

    Inspection

    Against drawings and rules

  5. 5

    Report

    Values and remarks

  6. 6

    Follow-up

    Re-test after corrections

Questions about Electrical Testing & Inspection

Answered by our engineers. Ask us if yours is not here.

Ask an engineer

Which tests does the Electrical Inspector need?

Typically insulation resistance, earth resistance, transformer oil BDV and relay test reports, depending on the installation.

Are your instruments calibrated?

Yes. Every report shows the instrument and its calibration details.

How often should we test?

Periodic testing is usually yearly, and more often for critical equipment or where the inspector or insurer requires it.

Can you test while the plant runs?

Some checks, like thermography and earth tests, can; insulation and relay tests need a planned shutdown.

Electrical Testing & Inspection across all 41 districts of Rajasthan

We handle this work with all three DISCOMs, from our Jaipur office. Find your area:

Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra

WhatsApp