Transformer and Substation Consultancy in Jaipur & Rajasthan
Sizing, design, specification, supervision and testing of consumer transformers and substations, from a single pole-mounted unit to an indoor 33 kV substation.
How Transformers & Substations works
The transformer and substation are the most expensive and critical parts of most electrical installations. A transformer that is too small runs hot and fails early; one that is too large wastes no-load losses for its whole life. A poorly laid-out substation fails inspection and is unsafe to maintain.
We size the transformer from your load and growth, choose between oil-filled and dry type, specify losses and accessories, design the substation layout with clearances, fencing, earthing and oil soak pit, review vendor drawings and supervise installation and testing.

What our Transformers & Substations service covers
Transformer sizing
Rating from load, growth and losses.
Specification
Type, losses, protection and accessories.
Substation layout
Clearances, fencing, soak pit and fire safety.
Earthing design
Substation earthing grid.
Supervision and testing
Installation, oil and electrical tests.
Condition assessment
Oil BDV, thermography and maintenance plans.
Documents for Transformers & Substations
- Load details or existing bills
- Site plan showing the substation area
- DISCOM feasibility or demand note
- Existing transformer details (for upgrades)
Reports and approval letters
- Transformer sizing note
- Substation layout and earthing drawings
- Transformer specification
- Factory and site test reports
- CEIG approval file
Regulations behind Transformers & Substations
- CEA (Measures relating to Safety and Electric Supply) Regulations, 2023
- IS 1180 (distribution transformers) and IS 2026 (power transformers)
- BEE star rating and loss levels for distribution transformers
Transformers & Substations in 6 steps
Transformer supply and erection are by your vendor and licensed contractor; we design, supervise, test and take the substation through approval.

- 1
Load study
Demand and growth
- 2
Design
Rating and layout
- 3
Specification
Vendor offers reviewed
- 4
Inspection
Factory tests if needed
- 5
Installation
Supervised erection
- 6
Approval
Tests and CEIG file
Questions about Transformers & Substations
Answered by our engineers. Ask us if yours is not here.
Ask an engineerWhat size transformer do I need?
It depends on your maximum demand, power factor and expected growth. We calculate it and also compare losses over the transformer’s life.
Oil-filled or dry type?
Oil-filled units are usual outdoors and cost less. Dry type is preferred indoors and in buildings where fire risk must be kept low.
Do you handle the approval?
Yes. We prepare the test reports and the Electrical Inspector approval file.
Can you check an old transformer?
Yes. Oil BDV and other oil tests, thermography and an inspection show its condition and what maintenance it needs.
Transformers & Substations across all 41 districts of Rajasthan
We handle this work with all three DISCOMs, from our Jaipur office. Find your area:
- Jaipur zone (JVVNL)Eastern Rajasthan
- Ajmer zone (AVVNL)Central and southern Rajasthan
- Jodhpur zone (JdVVNL)Western Rajasthan
Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra


