Electrical Testing and Inspection in Jaipur & Rajasthan
Pre-commissioning and periodic testing of transformers, panels, cables, relays and earthing, with formal reports for approvals, insurance and maintenance.
How Electrical Testing & Inspection works
Before a new installation is energised, and at regular intervals after that, its equipment has to be tested to show it is safe and will work as designed. The Electrical Inspector expects these test reports in the approval file, and insurers and auditors ask for them too.
We test transformers (IR, ratio, winding resistance and oil BDV), HT and LT panels, relays and breakers, HT and LT cables, and earthing systems, and inspect the installation against the drawings and the regulations.

What our Electrical Testing & Inspection service covers
Transformer tests
IR, ratio, winding resistance, oil BDV.
Panel and breaker tests
IR, contact resistance and operation checks.
Relay testing
Protection relays tested against settings.
Cable tests
IR and HV tests of HT and LT cables.
Earthing tests
Earth pit and grid resistance.
Inspection
Installation checked against drawings and rules.
Documents for Electrical Testing & Inspection
- Single line diagram and layout
- Equipment manufacturer test certificates
- Relay setting chart
- Earlier test reports (for periodic testing)
Reports and approval letters
- Test reports for each piece of equipment
- Inspection checklist and observations
- Instrument and calibration details
- Recommendations for corrections
Regulations behind Electrical Testing & Inspection
- CEA (Measures relating to Safety and Electric Supply) Regulations, 2023
- Relevant Indian Standards for transformers, switchgear, cables and earthing
- Electrical Inspector requirements for approval test reports
Electrical Testing & Inspection in 6 steps
Some tests need the equipment to be de-energised; we plan the shutdown with you.

- 1
Scope
Equipment and tests
- 2
Planning
Shutdown and permits
- 3
Testing
Calibrated instruments
- 4
Inspection
Against drawings and rules
- 5
Report
Values and remarks
- 6
Follow-up
Re-test after corrections
Questions about Electrical Testing & Inspection
Answered by our engineers. Ask us if yours is not here.
Ask an engineerWhich tests does the Electrical Inspector need?
Typically insulation resistance, earth resistance, transformer oil BDV and relay test reports, depending on the installation.
Are your instruments calibrated?
Yes. Every report shows the instrument and its calibration details.
How often should we test?
Periodic testing is usually yearly, and more often for critical equipment or where the inspector or insurer requires it.
Can you test while the plant runs?
Some checks, like thermography and earth tests, can; insulation and relay tests need a planned shutdown.
Electrical Testing & Inspection across all 41 districts of Rajasthan
We handle this work with all three DISCOMs, from our Jaipur office. Find your area:
- Jaipur zone (JVVNL)Eastern Rajasthan
- Ajmer zone (AVVNL)Central and southern Rajasthan
- Jodhpur zone (JdVVNL)Western Rajasthan
Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra


