Electrical Safety Audit in Jaipur & Rajasthan

A full check of your installation against the CEA safety regulations and Indian Standards, led by a Chartered Electrical Safety Engineer, with tests and a prioritised action plan.

An SKE engineer in a helmet testing a live panel with a clamp meter
Since 2008All Rajasthan
JVVNL, AVVNL and JdVVNL areas

How Electrical Safety Audit works

Many fires and shocks in factories and buildings start with an electrical fault that could have been found earlier: a hot joint, an overloaded cable, an earth pit that no longer works, a missing earth leakage device or an unsafe working practice.

Our electrical safety audits are led by a Chartered Electrical Safety Engineer. We inspect the installation from the incoming supply to the final circuits, test earthing and insulation, scan panels with a thermal camera and check records and practices against the CEA (Measures relating to Safety and Electric Supply) Regulations, 2023 and the relevant Indian Standards.

Two engineers in helmets reviewing an energy audit beside factory panels

What our Electrical Safety Audit service covers

01

Incoming supply and substation

Transformer, HT panel, protection, clearances and fencing.

02

Earthing

Earth pits, earth resistance and continuity of protective conductors.

03

Panels and distribution boards

Ratings, coordination, loose connections and labelling.

04

Cables and wiring

Sizing, routing, joints and insulation resistance.

05

Thermography

Hot spots in panels and joints under load.

06

Practices and records

Permits, PPE, drawings, test registers and approvals.

Documents for Electrical Safety Audit

  • Single line diagram and electrical layouts
  • Earlier safety audit or inspection reports
  • Electrical Inspector approvals for HT equipment
  • Earth pit register and test records
  • List of major equipment and connected load
  • Maintenance records

Open your document checklist in the customer portal

Reports and approval letters

  • Safety audit report with executive summary
  • Observations with photographs and locations
  • Earth resistance, IR and thermography results
  • Risk rating and the applicable rule for each observation
  • Prioritised action plan
  • Compliance checklist for the Electrical Inspector

Regulations behind Electrical Safety Audit

  • CEA (Measures relating to Safety and Electric Supply) Regulations, 2023
  • IS 3043: Code of practice for earthing
  • IS 732: Code of practice for electrical wiring installations
  • National Electrical Code and National Building Code of India

Electrical Safety Audit in 7 steps

Findings reflect site conditions on the audit dates. We recommend an audit every year, and after any major change to the installation.

The SKE team in helmets and high-visibility vests at a solar site
  1. 1

    Scope

    Areas and installations

  2. 2

    Records

    Drawings and past reports

  3. 3

    Inspection

    Visual survey of the installation

  4. 4

    Testing

    Earth, IR and thermography

  5. 5

    Rating

    Risk of each observation

  6. 6

    Report

    Prioritised action plan

  7. 7

    Re-check

    Optional after corrections

Questions about Electrical Safety Audit

Answered by our engineers. Ask us if yours is not here.

Ask an engineer

What is checked in an electrical safety audit?

The supply and substation, earthing, panels, cables, protection devices, clearances, signage, records and safe working practices, supported by earth, insulation and thermal tests.

How often should we audit?

Most sites audit once a year. High-risk sites, insurers or your own policy may need more frequent audits.

Who leads the audit?

A Chartered Electrical Safety Engineer leads every audit, supported by our testing engineers.

Is the report accepted by insurers and the Electrical Inspector?

Our reports follow the CEA regulations and Indian Standards and are regularly used for insurance surveys and inspector visits.

Do you also audit fire safety and energy?

Yes. We offer fire safety audits and energy audits separately or together with the safety audit.

Electrical Safety Audit across all 41 districts of Rajasthan

We handle this work with all three DISCOMs, from our Jaipur office. Find your area:

Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra

WhatsApp