Electrical Safety, Fire Safety, Risk & Energy Audits in Jaipur & Rajasthan

Integrated electrical safety, fire safety, risk and energy audits by a Chartered Electrical Safety Engineer and BEE-authorised energy auditor, with site testing and a prioritised action report.

An SKE engineer in a helmet testing a live panel with a clamp meter
Since 2008All Rajasthan
JVVNL, AVVNL and JdVVNL areas

How Safety, Fire, Risk & Energy Audits works

Electrical faults are one of the leading causes of fires in Indian factories, hospitals and commercial buildings. An electrical safety audit finds those hazards before they cause harm: overloaded cables, poor earthing, missing protection, hot joints, unsafe panels and gaps in maintenance practice. A fire risk audit looks at how a fire would start and spread and how prepared the facility is to respond. An energy audit finds where electricity is being wasted and what it would take to save it.

Shree Kalyan Enterprises carries out these audits individually or as one integrated engineering audit. Our team includes a Chartered Electrical Safety Engineer and a BEE-authorised energy auditor, and we use calibrated instruments, including thermal cameras, power quality analysers, earth testers and insulation testers, to back every observation with measurements.

Two engineers in helmets reviewing an energy audit beside factory panels

What our Safety, Fire, Risk & Energy Audits service covers

01

Electrical safety audit

Panels, cables, earthing, protection, PPE and practices against CEA regulations and IS standards.

02

Fire safety & risk audit

Ignition sources, fire load, detection, suppression, escape and emergency preparedness.

03

Energy audit

Load profile, maximum demand, power factor, motors, HVAC, lighting and losses.

04

Thermography

Thermal scanning of panels and joints to find hot spots.

05

Earthing & IR tests

Earth resistance and insulation resistance measurements.

06

Risk rating

Each observation rated by severity and likelihood.

Documents for Safety, Fire, Risk & Energy Audits

  • Single line diagram and electrical layouts (if available)
  • Last 12 months electricity bills (for energy audit)
  • List of major equipment and connected load
  • Earlier audit or inspection reports
  • Fire NOC and fire system details (for fire audit)
  • Maintenance records

Open your document checklist in the customer portal

Reports and approval letters

  • Executive summary for management
  • Observation-wise report with photographs
  • Measured test and thermography results
  • Risk rating of each observation
  • Energy conservation measures with payback
  • Prioritised action plan

Regulations behind Safety, Fire, Risk & Energy Audits

  • CEA (Measures relating to Safety and Electric Supply) Regulations, 2023
  • National Electrical Code and relevant Indian Standards (including IS 3043 for earthing)
  • National Building Code of India – fire and life safety provisions
  • Energy Conservation Act, 2001 and BEE guidelines

Safety, Fire, Risk & Energy Audits in 7 steps

Audit findings depend on site conditions at the time of the audit. Estimated energy savings depend on implementation and operating conditions and cannot be guaranteed.

The SKE team in helmets and high-visibility vests at a solar site
  1. 1

    Scope

    Audit type & areas

  2. 2

    Data

    Drawings, bills, records

  3. 3

    Site survey

    Visual inspection

  4. 4

    Measurement

    Tests & thermography

  5. 5

    Analysis

    Risks & savings

  6. 6

    Report

    Prioritised actions

  7. 7

    Review

    Management briefing

Questions about Safety, Fire, Risk & Energy Audits

Answered by our engineers. Ask us if yours is not here.

Ask an engineer

What is checked in an electrical safety audit?

Panels, switchgear, cables, earthing, protection devices, clearances, signage, maintenance practices and compliance with the CEA safety regulations and Indian Standards, supported by tests and thermography.

How often should an electrical safety audit be done?

Many organisations audit annually, and more often for high-risk facilities. Insurers, customers and internal policies may also set the frequency.

Can safety and energy audits be done together?

Yes. An integrated audit saves site time and shows how safety, equipment condition and energy performance are linked.

Who conducts the audit?

Audits are led by qualified engineers, including a Chartered Electrical Safety Engineer and a BEE-authorised energy auditor, using calibrated instruments.

Will the audit disrupt operations?

Most inspections are carried out while the facility runs normally. Some tests need short, planned shutdowns, which we schedule with you.

Do you help implement the recommendations?

Yes. We can prepare specifications, review contractor work and re-inspect after corrections.

Safety, Fire, Risk & Energy Audits across all 41 districts of Rajasthan

We handle this work with all three DISCOMs, from our Jaipur office. Find your area:

Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra

WhatsApp