Energy Audit Services in Jaipur & Rajasthan

Detailed energy audits for factories, hospitals, hotels and buildings, led by a BEE certified energy auditor, with measured data and a costed list of savings.

An SKE engineer in a helmet testing a live panel with a clamp meter
Since 2008All Rajasthan
JVVNL, AVVNL and JdVVNL areas

How Energy Audit works

Electricity is one of the largest running costs for most factories and commercial buildings in Rajasthan, and a large share of it is often wasted: motors running lightly loaded, poor power factor, inefficient lighting and air conditioning, compressed-air leaks and avoidable maximum demand charges.

Our energy audits are led by a BEE certified energy auditor. We log the load, measure the major equipment, study 12 months of electricity bills and the tariff, and find where energy and money are lost. Every recommendation comes with the estimated saving, the investment and the payback period, so you can decide what to do first.

Two engineers in helmets reviewing an energy audit beside factory panels

What our Energy Audit service covers

01

Bill and tariff analysis

Twelve months of bills, maximum demand, power factor and tariff category reviewed.

02

Load logging

Load profile, demand and power quality logged with a power analyser.

03

Motors and drives

Loading and efficiency of major motors, pumps, fans and compressors.

04

HVAC and lighting

Chillers, AC units and lighting checked against good practice.

05

Thermal survey

Thermography of panels and joints to find losses and hot spots.

06

Savings and payback

Each measure costed with saving, investment and payback.

Documents for Energy Audit

  • Last 12 months electricity bills
  • Single line diagram (if available)
  • List of major equipment with ratings
  • Production or occupancy data for the same period
  • DG set fuel and running hours (if used)
  • Earlier energy audit reports

Open your document checklist in the customer portal

Reports and approval letters

  • Energy audit report with executive summary
  • Measured load profiles and test results
  • Energy balance by area or equipment
  • Energy conservation measures with saving and payback
  • Power factor and maximum demand recommendations
  • Implementation priority list

Regulations behind Energy Audit

  • Energy Conservation Act, 2001 and its amendments
  • Bureau of Energy Efficiency (BEE) guidelines for energy audits
  • Rajasthan tariff orders of RERC for demand and power factor charges

Energy Audit in 7 steps

Savings are estimates based on site conditions and operating hours at the time of the audit. Actual savings depend on implementation.

The SKE team in helmets and high-visibility vests at a solar site
  1. 1

    Scope

    Sites, loads and audit level

  2. 2

    Data

    Bills, drawings, equipment list

  3. 3

    Site survey

    Walk-through of the plant

  4. 4

    Measurement

    Load logging and tests

  5. 5

    Analysis

    Losses and saving options

  6. 6

    Report

    Costed recommendations

  7. 7

    Review

    Briefing with management

Questions about Energy Audit

Answered by our engineers. Ask us if yours is not here.

Ask an engineer

What is the difference between a walk-through and a detailed energy audit?

A walk-through audit is a short survey that finds the obvious savings. A detailed audit measures the main equipment, logs the load and gives a costed, measured list of savings with payback.

How long does an energy audit take?

A walk-through audit usually takes one or two days on site. A detailed audit of a factory takes longer, depending on its size and the number of areas to measure.

Who carries out the audit?

Our audits are led by a BEE certified energy auditor, with engineers using calibrated power analysers, thermal cameras and other instruments.

Will the audit stop our production?

No. Measurements are taken while the plant runs normally. A few checks may need a short planned shutdown, which we schedule with you.

Can you help implement the savings?

Yes. We can specify the equipment, review vendor offers and verify the savings after implementation.

Energy Audit across all 41 districts of Rajasthan

We handle this work with all three DISCOMs, from our Jaipur office. Find your area:

Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra

WhatsApp