Electrical Thermography, Calibration & Condition Assessment in Rajasthan

Infrared thermography, calibration of meters and protection devices, and condition assessment of electrical assets to support predictive maintenance and prevent breakdowns.

Two engineers in helmets reviewing an energy audit beside factory panels
Since 2008All Rajasthan
JVVNL, AVVNL and JdVVNL areas

How Thermography & Condition Assessment works

Most electrical failures give a warning first: heat. A loose lug, an overloaded breaker or a failing joint runs hotter than its surroundings long before it trips or catches fire. Infrared thermography shows these hot spots on live equipment, without shutdown, so they can be repaired in a planned way.

Shree Kalyan Enterprises carries out thermographic surveys of HT and LT panels, bus ducts, transformers, cable terminations, motor control centres and solar plants (modules, combiner boxes and inverters). Each anomaly is reported with a thermal image, a visual image, the temperature rise and a severity classification.

An engineer using a thermal camera on electrical equipment beside a laptop

What our Thermography & Condition Assessment service covers

01

Infrared thermography

Panels, joints, bus ducts, transformers and cables scanned under load.

02

Solar thermography

Modules, strings, combiner boxes and inverters inspected.

03

Calibration checks

Energy meters, CTs / PTs and protection relays checked.

04

Condition assessment

Asset health review of transformers, breakers and panels.

05

Transformer oil tests

BDV and oil condition tests arranged.

06

Maintenance priority

Defects ranked for planned correction.

Documents for Thermography & Condition Assessment

  • Asset list and SLD
  • Load schedule (to plan scanning at normal load)
  • Earlier thermography or maintenance reports
  • Meter and relay details for calibration

Open your document checklist in the customer portal

Reports and approval letters

  • Thermography report with thermal and visual images
  • Severity classification of each hot spot
  • Calibration results
  • Asset condition summary
  • Maintenance priority list
  • Re-scan after corrections (optional)

Regulations behind Thermography & Condition Assessment

  • CEA (Measures relating to Safety and Electric Supply) Regulations, 2023
  • Relevant IS / IEC standards and good industry practice for infrared thermography
  • Manufacturer maintenance recommendations

Thermography & Condition Assessment in 6 steps

Thermography must be done when equipment is carrying normal load. We schedule the survey around your peak operating hours.

The SKE team in helmets and high-visibility vests at a solar site
  1. 1

    Scope

    Assets & load

  2. 2

    Survey

    Under normal load

  3. 3

    Imaging

    Thermal & visual

  4. 4

    Calibration

    Meters & relays

  5. 5

    Analysis

    Severity rating

  6. 6

    Report

    Priority actions

Questions about Thermography & Condition Assessment

Answered by our engineers. Ask us if yours is not here.

Ask an engineer

What is electrical thermography?

It is the use of an infrared camera to measure the temperature of electrical equipment while it is energised and under load, so overheating can be found without shutdown.

How often should thermography be done?

Annually is common, and every six months for critical or high-load installations.

Is a shutdown needed?

No. Thermography is done on live equipment under normal load. Some calibration tests may need short isolations.

Can you scan solar plants?

Yes. We scan modules, combiner boxes and inverters to find hot spots, bypass diode failures and connection problems.

What do we receive?

A report with thermal and visual images, temperatures, severity ratings and recommended actions.

Thermography & Condition Assessment across all 41 districts of Rajasthan

We handle this work with all three DISCOMs, from our Jaipur office. Find your area:

Cities: Jaipur · Jodhpur · Udaipur · Kota · Ajmer · Bhilwara · Bikaner · Alwar and Bhiwadi · Sikar · Barmer and Balotra

WhatsApp